Curtis GEMSS63A1000 User Manual

PROGRAMMING GUIDE PG2
Programming Options (cont.)
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press Ż or Ź to choose the number to be changed. Then press
~ repeatedly to change the number value. Press Ż or Ź to choose the next number to change or choose exit
and press ~.
Access Code - sets the access code entered to access programming mode (the factory default is 1-2-3-4).
Once accessed, press Ż or Ź to choose the number to change. Then press
~ repeatedly to change the
number value (range is 1 to 4). Press Ż or Ź to choose the next number to change or choose exit and
press ~.
Banner Name - changes the banner name that appears on the display (the factory default is Curtis). No
banner name appears when all blanks are entered. Once accessed, press Ż or Ź to choose the letter to
change. Then press
~ repeatedly to change the number value. Press Ż or Ź to choose the next number to
change or choose ex and press ~ to exit.
Warmer Auto-Off - (some models) adjusts the length of time that elapses before the satellite warmer shuts off
BVUPNBUJDBMMZ5IJTGVODUJPOUBLFTQSJPSJUZPWFSUIFRVBMJUZUJNFSUIFGBDUPSZEFGBVMUJTIPVST5IFSBOHFJT
to 12 hours. Once accessed, press Ż or Ź to adjust the number of hours. Then press ~ to set and exit.
P-Maintenance - turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor
(the factory default is OFF). When ON, the UCM measures the number of gallons brewed before the
1.BJOUFOBODFSFNJOEFSBQQFBSTPOUIFEJTQMBZ5IFSBOHFJT0''UPHBMMPOT0ODFBDDFTTFEQSFTTŻ
or Ź to choose the desired setting, then, press
~ to exit.
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
ON). Once accessed, press Ż or Ź to choose the desired setting. Then, press ~ to exit.
Drip-out Mode - TFUTUIFESJQPVUNPEFUJNFS"GUFSXBUFSTUPQTnPXJOHJUBMMPXTBEEJUJPOBMUJNFGPSUIFXBUFS
to drain from the brew basket before the brew basket lock releases (the factory default is 2 min.). This feature
reduces the chance that the brew basket will be removed too early. The range is OFF to 5 minutes. Once
accessed, press Ż or Ź to choose desired setting, then, press ~ to exit.
Warmers Default - (some models) sets the warmer temperature (the factory default is MED). The available
TFUUJOHTBSF0'')*()'.&%'PS-08'5IFUFNQFSBUVSFTFUUJOHTBSF'0ODF
accessed, press Ż or Ź to choose the desired setting, then press
~. On twin brewers press Ż or Ź to choose
the desired setting for the second warmer, then press ~. Press ~ to exit. *OFF option not available on GEMX
series models.
Display Brew Time - turns the display of the brew time during brewing on or off (the factory default is ON).
Once accessed, press Ż or Ź to choose the desired setting, then press ~ to exit.
Display Messages - turns display of the message “Rinse Server Before Brewing” ON or OFF (the factory
default is ON). Once accessed, press Ż or Ź to choose the desired setting, then press ~ to exit.
QT Alarm On/Off - turns the quality timer alarm on or off (the factory default is OFF). An audible alarm goes
off when the quality timer has expired. Once accessed, press Ż or Ź to choose the desired setting. Then,
press ~ to exit.
Satellite Color - (GEMX series models only) changes the color scheme of the quality timer LEDs. Once
accessed, press Ż or Ź to choose the desired color to indicate “fresh” (ON). Press ~ to save, then press
Ż or Ź to choose the desired color to indicate “expired”. Press ~ to save and exit.
8$130(3"..*/((6*%&ø &

Curtis GEMSS63A1000 Specifications

General

Brand	Curtis
Model	GEMSS63A1000
Category	Coffee Maker
Language	English