Curtiss-Wright GT200 - Figure 4-2 Configuration Switch Diagram; Interrupt Self

OPERATION
4.2.17.5 Interrupt Self
Interrupt self allows network interrupts generated by the node to interrupt the generating
node upon receipt from the network. The default condition is OFF.
MEMORY
Link Receiver
Receiver 1
Receiver 0
Link Select
Link
Enable
Wrap
Enable
Wrap
Laser 1
Laser 0
Retransmit Enable
Receive
Enable
Write
Me Last
Transmit Enable
Foreign
Native
Host Data In
Figure 4-2 Configuration Switch Diagram
Copyright 2005 4-7 GT200 Hardware Reference