Curtiss-Wright GT200 - Hardware Specific

SPECIFICATIONS
A.1 Hardware Specific
A.1.1 GT200 3.3-Volt PCI Specifications
Hardware Compatibility: ......................................................................... PCI specification version 2.3
Physical Dimensions:
PCI Card ....................................................................................... 174.6 x 106.7 mm, one slot
Weight:
PCI Card ....................................................................................... 144.57 g
Electrical Requirements:.......................................................................... +4.75 to +5.25 VDC, 1.41 Amps
Power Dissipation:................................................................................... 7.5 Watts (max)
Temperature Range
Storage: ......................................................................................... -40° TO +85° C
Operation: ..................................................................................... 0° to +50° C
Network Line Transmission Rate: ........................................................... 2.5 Gbps
Message Length:...................................................................................... Variable
Maximum Nodes on Network Ring:........................................................ 255
Maximum Node Separation:
Short Link Fiber:........................................................................... 250 meters
Long Link Fiber:........................................................................... 10 kilometers
Shared Memory:
On-board Memory ........................................................................ 128 MB
Effective Network Bandwidth:
4 bytes/packet (random): .............................................................. 33 MB/s
128 bytes/packet (sequential): ...................................................... 210 MB/s
Node Latency:
Insertion: ...................................................................................... 0.35 µs
Pass Through: .............................................................................. 0.45 µs
Mean Time Between Failures (MTBF)
GT200, No Media......................................................................... 268,138 hours
GT200, 850 nm Short Wave Pluggable Transceiver..................... 253,974 hours
GT200 , 850 nm (x2) Short Wave Pluggable Transceiver ............ 241,230 hours
GT200, (x1) 850 & 1300nm (x1) Pluggable Transceivers............ 233,241 hours
GT200, 1300 nm Long Wave Pluggable Transceiver .................. 245,133 hours
GT200, 1300 nm (x2) Long Wave Pluggable Transceiver ........... 225,763 hours
Mean Time Between Failures (MTBF) is based on calculations using MIL-HDBK-217F, Appendix A, for a ground
benign environment.
Copyright 2005 A-1 GT200 Hardware Reference