1. INTRODUCTION
1.1 How To Use This Manual
1.1.1 Purpose
This document is a reference manual for the GT200 PCI and PMC card host interface. It
provides a physical and functional description of the GT200 network interface card. The
manual describes how to unpack, set up, install, and operate the hardware.
1.1.2 Scope
This information is intended for systems designers, engineers and network installation
personnel. You need at least a systems level understanding of general computer
processing, of memory and hardware operation, and of the specific host processor to
effectively use this manual.
1.1.3 Style Conventions
• Hexadecimal values are written with a “0x” prefix. For example, 0x03FF
• Code and monitor screen displays of input and output are boxed and indented on
a separate line. Text that represents user input is bolded. Text that the computer
displays on the screen is not bolded. For example:
C:\ls
file1 file2 file3
• Large samples of code are Courier font, at least one size less than context, and
are usually on a separate page or in an appendix.
1.2 Related Information
• PCI Local Bus Specification, Revision 2.2, 18 DEC 1998, PCI SIG
• PCI Local Bus Specification, Revision 2.3, 29 MAR 2002, PCI SIG
• CMC Specification (IEEE P1386/Draft 2.4a), Revision 21 MAR 2001, IEEE
• PMC Specification (IEEE P1386.1/Draft 2.4a), Revision 21 JAN 2001, IEEE
• GT200 (SCRAMNet GT) API Guide, Curtiss-Wright Controls, Inc.
(Document No. G-T-ML-G1AP1)
• Curtiss-Wright Controls, Inc web address: www.cwcembedded.com
• LinkXchange VLX2500 Hardware Reference Manual
(Doc. No. F-T-MR-VLX2500#), Curtiss-Wright Controls, Inc.
• LinkXchange GLX4000 Physical Layer Switch User Reference Manual
(Doc. No. F-T-MR-L5XL144), Curtiss-Wright Controls, Inc.
Copyright 2005 1-1 GT200 Hardware Reference
To Next Page
Loading...
Need help?
General
