P 190
19
The following personalizations may be obtained, relative to transmission format and the PRINT key on the
P 190’s front panel, by using the dip-switch on the RS232 card:
DIP 1 DIP 2 DIP 3 BAUD Speed
ON ON OFF 300
OFF ON OFF 600
OFF OFF OFF 1200
ON OFF OFF 2400
ON ON ON 4800
OFF ON ON 9600
DIP 4 Description
OFF Protocollo di trasmissione RTS/CTS
ON Protocollo di trasmissione XON/XOFF
DIP 5 Description
OFF Disabilita la trasmissione di $0D premendo il tasto PRINT
ON Abilita la trasmissione di $0D
DIP 6 DIP 7 DIP 8 Transmission format
OFF OFF OFF 8 bit senza parità, 1 bit di stop
OFF OFF ON 8 bit con parità EVEN, 1 bit di stop
ON OFF ON 8 bit con parità ODD, 1 bit di stop
ON OFF OFF 7 bit senza parità, 2 bit di stop
OFF ON OFF 7 bit con parità EVEN, 1 bit di stop
ON ON OFF 7 bit con parità ODD, 1 bit di stop
FIGURE 6
For functioning in Current Loop, solder together points 1 and 2.
For functioning in RS232 mode, solder together points 2 and 3.
INTERFACE
To Next Page
Loading...
