1. INSTALLATION AND USE
101-
DPT100-B/I/BT
alcohol, solvent
(Fig.1.16)
2) Pull up on the edge of the paper and close the cover (fig. 1.14);
3) Tear off the paper. The printer is now ready (fig.1.15).
1.6.2 Cleaning
To clean the printer, use a vacuum cleaner or soft cloth.
Before cleaning the printer, unplug its electrical cord and make sure that the printer is off.
Do not use alcohol, solvents or hard-bristled brushes.
Do not let water or other liquids seep into the printer.
(Fig.1.14)
(Fig.1.15)
To Next Page
Loading...
