3. PRINTER FUNCTIONS
3-2
DPT100-B/I/BT
The following pages provide a more detailed description of each command.
00$
[Name] Small character printing
[Format] ASCII NUL
Hex 00
Decimal 0
[Description] The printer prints in small characters (normal)
[Notes] • The commands $00 - $09 do not cancel the print buffer
• The commands which modify the direction of the characters are only active at the
beginning of the line
[Default] Setting in option register by means of front keys
[Reference] $01, $02, $03, $04
[Example]
10$
[Name] Double width printing
[Format] ASCII SOH
Hex 01
Decimal 1
[Description] The printer prints in double width format
[Notes] • The commands $00 - $09 do not cancel the print buffer
• The commands which modify the direction of the characters are only active at the
beginning of the line
[Default] Setting in option register by means of front keys
[Reference] $00, $02, $03, $04
[Example]
20$
[Name] Double height printing
[Format] ASCII STX
Hex 02
Decimal 2
[Description] The printer prints in double height format
[Notes] • The commands $00 - $09 do not cancel the print buffer
• The commands which modify the direction of the characters are only active at the
beginning of the line
[Default] Setting in option register by means of front keys
[Reference] $00, $01, $03, $04
[Example]
XEH.moCIICSA.moCnoitpircseD
nd...1dn75$D1$nd...1dnWSG.enilcihpargipd002afoetybnstnirP
)Ln()Hn(6F$D1$)Ln()Hn(}{SG.enildetnirptsrifehttatekcitehtsngilA
To Next Page
Loading...
