3. PRINTER FUNCTIONS
3-3
DPT100-B/I/BT
30$
[Name] Expanded printing
[Format] ASCII ETX
Hex 03
Decimal 3
[Description] The printer prints in expanded character mode
[Notes] • commands $00 - $09 do not cancel the print buffer
• the commands which modify the dimensions of the characters are only active at the
beginning of the line
[Default] Setting in the option register by means of the front keys
[Reference] $00, $01, $02, $04
[Example]
40$
[Name] Restore small character printing
[Format] ASCII EOT
Hex 04
Decimal 4
[Description] The printer resumes printing with small characters
[Notes] • The commands $00 - $09 do not cancel the print buffer
• the commands which modify the dimensions of the characters are only active at the
beginning of the line
[Default] Setting in the option register by means of the front keys
[Reference] $00, $01, $02, $03
[Example]
70$
[Name] Cancel print data buffer
[Format] ASCII BEL
Hex 07
Decimal 7
[Description] Deletes all the print data in the current print buffer.
[Notes] • If data that existed in the previously specified printing area also exists in the currently
specified printing area, it is deleted.
[Default]
[Reference]
[Example]
A0$
[Name] Forward feeds one line
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Forward feeds one line equivalent to a line of print
[Notes] • This command brings about the printing of the contents of the line buffer
[Default]
[Reference] $0B
To Next Page
Loading...
