3. PRINTER FUNCTIONS
3-9
DPT100-B/I/BT
[Example]
15$B1$
[Name] Enable underlined printing
[Format] ASCII ESC Q
Hex 1B 51
Decimal 27 81
[Description] After this command has been received, the characters are printed underlined
[Note]
[Default]
[Reference] $1B $71
[Example]
25$B1$
[Name] Set reverse mode printing
[Format] ASCII ESC R
Hex 1B 52
Decimal 27 82
[Description] Selects printing in reverse mode: the receipt feeds out of hte printer with the printing in
normal mode running from left to right.
[Notes]
[Default] Setting in option register by means of front keys
[Reference] $1B $4E
[Example]
75$B1$
[Name] Prints a graphic line at 200 dpi
[Format] ASCII ESC W
Hex 1B 57
Decimal 27 87
[Description] After receiving this command, the printer waits for 48 bytes which correspond to an entire
graphic line. In fact, 48 bytes of 8 bits each correspond to 384 dots per line.
[Notes]
[Default]
[Reference]
[Example]
16$B1$)dd(
[Name] Selects the number of dot spaces
[Format] ASCII (dd) ESC a
Hex (dd) 1B 61
Decimal (dd) 27 97
[Description] (dd) are two ASCII characters which identify a hexadecimal byte and correspond to the
number of dot lines between one print line and another
[Notes]
[Default] = 0
[Reference]
To Next Page
Loading...
