Custom Engineering s'print - Page 44

3. PRINTER FUNCTIONS
3-10
DPT100-B/I/BT
[Example]
36$B1$
[Name] Management of bar code printing
[Format] ASCII ESC c [code] [height] [position] [options] [length] [data]
Hex 1B 63
Decimal 27 99
[Description] This command executes a barcode printing depending on the following parameters:
[code] = Type of bar code (ASCII character)
VALUES:
I Interleved 2/5
C Code 39
B CodaBar
e EAN8
E EAN13
[height] = Number of dot lines in 1/8 mm units.
[position] = Left hand margin, expressed in 1/8 mm units.
[options]
0tiBnoitcnuFnoitpircseD
0detnirptonsitigidkcehCtigidkcehC
1detnirpsitigidkcehC
1tiBnoitcnuFnoitpircseD
-desutoN-
3tiB2tiBnoitcnuFnoitpircseD
00on
noitisopIRH
01 woleb
10 evoba
11 wolebdnaevoba
5tiB4tiBnoitcnuFnoitpircseD
00 lamron
htdiwedocrab
01 elbuod
10 elpirt
11 desutoN