Custom Engineering s'print - Page 47

3. PRINTER FUNCTIONS
3-13
DPT100-B/I/BT
tiBnO/ffOxeHlamiceDnoitcnuF
01,ffO000 ylreporpgnikrowrosnesrepaP
nO03 3 gnikrowtonrosnesrepaP
3,2ffO000 :rosnesdne-repaP
tneserprepaP
nOC021:rosnesdne-repaP
tneserptonrepaP
4- - - ]devreseR[
5ffO000 tcerrocerutarepmetdaeH
nO0223rorreerutarepmetdaeH
6ffO000 tcerrocegatlovyrettaB
nO0446rorreegatlovyrettaB
7- - - ]devreseR[
[Default]
[Reference]
[Example]
n42$D1$
[Name] Set absolute shift into a graphic line.
[Format] ASCII GS $ n
Hex 1D 24 n
Decimal 29 36 n
[Range] 0≤ n ≤ 47
[Description] Set the print beginning position into a graphic line based on the current value of n that
indicate the byte number of shift from left margin.
[Notes] • Settings outside the specified printable area are ignored.
[Default]
[Reference]
[Example]
n94$D1$
[Name] Transmit printer ID.
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51
[Description] Transmits the printer ID specified by n follows:
nDIretnirPnoitacificepS
94,1DIledomretnirP
)loc42(05$
)loc04(45$
loc42(06$ htooteulB )noisrevygolonhcetsseleriw
loc04(16$ htooteulB )noisrevygolonhcetsseleriw
05,2desutoN00$otdexiF
15,3MORDInoisrevsdnepeDno)rahc4(MORnoisrev
[Notes] • This command is executed when the data is processed in the data buffer. Therefore,