Need help?Do you have a question about the Cutech 40180H and is the answer not in the manual?
General| Model | 40180H |
|---|---|
| Category | Power Tool |
| Type | Bench Grinder |
| Maximum Grinding Wheel Diameter | 8 inches |
| Maximum Grinding Wheel Width | 1 inch |
| Arbor Size | 5/8 inch |
Explains how to adjust the tension and ensure proper function of the cutterhead guard for safety.
Details the connection of the dust port and the use of the adapter for vacuum hoses for dust collection.
Guides on checking and adjusting table coplanarity and cutterhead parallelism for accurate woodworking results.
Instructions for adjusting the jointer fence to specific angles, including setting 90 and 135-degree stops.
Details how to adjust the infeed and outfeed extension supports for coplanarity and parallelism.
Explains how to feed wood with or against the grain for smooth surface finish and to avoid tear-out.
Illustrates the correct hand placement for safe and effective feeding of material into the jointer.
Describes the process of surfacing or planing a flat surface of a workpiece using the jointer.
Details the common operation of squaring a workpiece edge using the jointer's fence and cutterhead.
Provides instructions for replacing or rotating the indexable cutter inserts for optimal cutting performance.
Step-by-step guide on how to safely remove and replace the drive belt for the jointer.
A detailed list of all jointer components with their corresponding numbers and quantities for reference.
To Next Page
