Setup extend temperature sensor
extend wired temperature sensors DS18B20.
ou can preset a high and a low level fo
r every channel, if the current temperature is above the high level
or below the low level, CWT5016 alarm.
can also send sms command to get current temperature.
can set the value to reduce
to avoid amounts of alarm/recover sms in a short time.
Designed for repeat alarm status notifies
to phones, 0 means disable repeat notification.
a counter of alarm status ensure timer, designed to avoid shake mistakes. 0 means no counter.
the channel will execute alarm
send alarm sms, interlock etc) when it is triggered,
this line alarm event will cause
buzzer and extend buzzer or siren action.
If digital input 0 alert, output 0 close
To Next Page
Loading...