CWT 5016 - All SMS Content Setup; System Priority Settings

11
SHEN ZHEN YIKEHUDONG
TECHNOLOGY TRADE LT
D
TEL
：
+86
-
755
-
26719954
4.2.4
ALL SMS
In this
page
, you can see
all sms content
s
that
you have defined, include digital inputs alarm/recover
sms, AD inputs alarm/recover sms etc. you can
Double
-
click
it to modify.
4.2.5
System
Prio
In this
page
, you can
set authorization
for CS numbers
“
O
”
means
enable
authorization
;
“
X
”
means
disable
authorization
.
CWT501
6
Use
r
’s manual
12
www.mobq2000.com
Authority
Explanation
admin
CanArm/disarm or not
Modify by sms
This CS number can be modify by sms command or not
Change cs phones
This CS number can modify other CS number by sms command or not
Powerup sms
Can receive t
he status sms or not when RTU is restarted by sms command
Daily report sms
Can receive the daily report or not
Timer mms
Null
Alarm mms
Null
I
-
tmp alarm sms
Can receive the alarm sms or not when internal temperature sensor alarm
I
-
tmp alarm ring
Can
receive the alarm phone call or not when internal temperature sensor alarm
Power fail sms
Can receive the alarm sms of power failure or not
Power fail ring
Can receive the alarm phone call of power failure or not
Signal low alarm
Null
Sample sms
Null
M2M svr
RTU send sms to the CS number with CWT_IO protocol
Arm notify
C
an receive sms when RTU arm or disarm