Cyber Suite LED Keypad - User Card Numbers

CyberSuite™ LED Keypad User Manual
13
USER CARD NUMBERS
This menu is only for Card Reader interface
enabled Keypads.
The CyberSuite™ Alarm system is able to be interfaced with
a CyberSuite™ Card Reader device to provide proximity
card access to your condominium. If the Card Reader
interface has been installed, each user can be assigned a
unique card number that is stored on a proximity device.
Programming or Changing User Card Numbers
• Enter SETUP LOGIN mode if you have not done so
already (see page 6 for details)
• Enter the following key press sequence:
,
, [USER NUMBER] ,
The card details can now be automatically programmed by
presenting the card at a reader interface, and pressing
to confirm the new card details.
Deleting a User Card
• Enter SETUP LOGIN mode if you have not done so
already (see page 6 for details)
• Enter the following key press sequence:
,
, [USER NUMBER] , , ,