CyberSuite™ LED Keypad User Manual
2
OPERATION
The following section provides you with information on how
to use the CyberSuite™ keypad.
When the text [USER CODE] is shown this
indicates that you are required to enter your
user code. The default Master Code to gain
access to your system is . This
code MUST be changed, see page 5 for how
to program user codes.
Many of the features and options must be
enabled by the installation company or
property manager. If the feature is not
programmed or an option is not enabled the
system will generate a rejection tone. Refer
to the system configuration tables on page
25.
INDICATOR LIGHTS
The CyberSuite™ LED keypad features three status indicator
lights showing the condition of the CyberSuite™ Security
System.
Bypass Power/Trouble
Install Ready Indicator
Message Armed/Alarm
Figure 1 - Indicator Lights
To Next Page
Loading...
