CyberPower M550L User Manual

BEFORE REPLACING THE BATTERY
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. DO NOT lay tools or other metal parts on top of battery or any battery terminals.
4. Wear rubber gloves and boots.
BATTERY REPLACEMENT
1 2
43
1 2 43
CAUTION! For UPS which is equipped with
extended battery connector, only connect to
CyberPower extended battery pack. Contact
CyberPower Systems about extended battery
pack.
REMINDER: Batteries are considered
HAZARDOUS WASTE and must be disposed
of properly. Most retailers that sell lead-acid
batteries collects used batteries for recycling,
as required by local regulations.
BATTERY REPLACMENT PROCEDURE
STEP 1: Remove the front panel of the UPS.
STEP 2: Remove two screws from the battery compartment cover.
STEP 3: Slide the cover completely o from the unit.
STEP 4: Disconnect the battery wires from the batteries and remove the batteries from
the compartment. Insert the new battery pack. Connect the Red battery cable to
Red connector on Battery pack and connect Black ones.
STEP 5: Assemble the battery compartment cover, screws and front panel in the reverse
sequence of above steps. Recharge the unit for 16 hours to ensure the UPS performs
expected runtime.
BATTERY WARNINGS - continued

CyberPower M550L Specifications

General

Brand	CyberPower
Model	M550L
Category	UPS
Language	English