CyberPower OR600ERM1U User Manual

7
Self Test Yes
Escape to function menu
No Action In Line Mode, select
YES to perform a Self
Test on the battery.
Buzzer
Setting
Buzzer on
Buzzer off
Buzzer on “b.on” is buzzer
enabled; “b.oF” is
buzzer disabled.
If b.oF is selected, the
unit will mute all alarms
except for fault or
overload condition.
LCD Sleep Auto off
Always on
L.on
“L.on” (Auto Off is on):
In Line Mode, LCD
screen will off
automatically after 1
min of inactivity; in
Battery Mode, LCD
screen is always on.
“L.oF” (Auto Off is off):
LCD screen is always
on.
Last Fault
Reason
There is no confirm
page for this item. It will
only show the error
code for last fault
reason.
E01 : Charger fault
(Over Charge).
E02 : Charger fault (No
Charge)
E11 : Battery Fault
E21 : Output short.
E22 : Over load.
Back to
Default
No Action Select Yes to restore
the UPS factory default
settings.
Escape
Item
Return to the previous
page.

CyberPower OR600ERM1U Specifications

General

Brand	CyberPower
Model	OR600ERM1U
Category	UPS
Language	English