EasyManuals Logo

CyberPower PR5000LCDRTXL5U User Manual

CyberPower PR5000LCDRTXL5U
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Storage
To store your UPS for an extended period, cover it and store with the
battery fully charged. Recharge the battery every three months to ensure
battery life.
Battery Replacement
Please read and follow the Safety Instructions before servicing the
battery. Battery replacement should be performed by trained personnel
who are familiar with the procedures and safety precautions.
Safety Precautions
CAUTION!Only use replacement batteries which are certified
by CyberPower Systems. Use of incorrect battery type is an
electrical hazard that could lead to explosion, fire, electrical shock,
or short circuit.
CAUTION!Batteries contain an electrical charge that could
cause severe burns. Before servicing batteries, please remove
any conductive materials such as jewelry, chains, wrist watches,
and rings.
CAUTION! - Do not open or mutilate the batteries. Electrolyte
fluid is harmful to the skin/eyes and may be toxic.
CAUTION! - To avoid electrical shock, turn off and unplug the UPS
from the wall receptacle before servicing the battery.
CAUTION!Only use tools with insulated handles. Do not lay
tools or metal parts on top of UPS or battery terminals.
Replacement Batteries
Please refer to the Technical Specifications of the user manual for the
model number of the correct replacement batteries. To purchase these
batteries, log onto www.CPSww.com, or contact your local dealer.
Battery Disposal
Batteries are considered hazardous waste and must be disposed of
properly. Contact your local government for more information about
proper disposal and recycling of batteries. Do not dispose of batteries
in a fire.
Battery Installation
1 Remove the front panel.
2 Remove the retaining screws of the cable
protection cover, and then remove the cover
itself.
3 Pull the plastic sticker out slowly to
remove the battery module.
4 Put the new battery modules back into the
compartment.
5 Tighten the screws and replace the cable
protection cover and the front panel.
MAINTENANCE
9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CyberPower PR5000LCDRTXL5U and is the answer not in the manual?

CyberPower PR5000LCDRTXL5U Specifications

General IconGeneral
Output power4000 W
UPS topologyLine-Interactive
Surge energy rating2430 J
Output power capacity5 kVA
Emergency Power Off (EPO)Yes
Battery technologySealed Lead Acid (VRLA)
Battery recharge time8 h
Form factor-
Display typeLCD
CertificationFCC, UL 1778, CSA C22.2 No. 107.3-05, ROHS
Product colorBlack
Rack capacity5U
Modem (RJ-11) ports1
Serial ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Dimensions (WxDxH)431.8 x 622.3 x 222.25 mm
Management platformSelf Test, Auto-Charge, Auto-Restart
Operating temperature (T-T)32 - 104 °F
Compatible operating systemsWindows 2000, 2003, XP, Vista, 7
Storage temperature (T-T)-15 - 45 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Weight100700 g

Related product manuals