33
The CLOUD G/CLOUD G LUX has a headrest that automatically adjusts the harness
height without the need to rethread it. Using the seat's No Rethread Harness, the headrest
may be adjusted up and down through 12 positions to t your baby.
The CLOUD G/CLOUD G LUX is shipped in the lowest position with the Infant Insert (pg.
64) already in position.
1. Unbuckle the Harness and Chest Clip
2. Place the child in the Infant Carrier, making
sure the buttocks are sitting in the very
bottom of the seat, with their crotch at the
crotch strap.
3. Adjust for your baby by pulling up on the
No Rethread Harness Adjuster AA while
sliding the headrest up until the Harness
Slots are even with or slightly below your
child's shoulders.
IMPORTANT: For proper use of the Infant
Carrier, the Harness straps MUST be AT
OR JUST BELOW your child's shoulders
(see pg. 9).
NOTE: Regularly check for proper harness height as your child grows.
Infant Car Seat Features
No Rethread Harness
AA
To Next Page
Loading...
Need help?
General
