56
Installing and Removing the Infant Carrier
Installing the Infant Carrier Only Using Lap/Shoulder Belts (Alternate)
Use this alternate installation method only when the preferred method found on
page 52 does not work with your vehicle Lap and Shoulder belts.
!
WARNING! DEATH or SERIOUS INJURY can occur.
• NEVER install this child restraint using a non-locking vehicle lap shoulder belt. A locking
clip must be used with a vehicle belt that DOES NOT LOCK. Call CYBEX Customer
Care at 1-877-242-5676 to obtain a locking clip.
• ALWAYS have the handle locked while using this child restraint in a vehicle.
• NEVER INSTALL the Infant Carrier with both the Lap and Shoulder Belts routed
underneath the Belt Guides.
• NEVER recline back rest when using carrier in vehicle.
1. Position Infant Carrier rmly against the
back of the rear vehicle seat as shown.
2. Route only the vehicle lap belt under the
CARRIER BELT GUIDES and BUCKLE
THE BELT.
CLICK!
ww
qq
To Next Page
Loading...
Need help?
General
