48
Installing and Removing the Infant Carrier
Installing with Base Using Lap Belt Only
4. Open SafeLock Belt Tensioner.
5. Route the vehicle lap belt under the
SafeLock Belt Tensioner and through
the blue belt guides on both sides of the
Base. BUCKLE THE BELT. Make sure
the lap belt lays at and is not twisted.
The vehicle belt should ALWAYS be
routed UNDER the tab on the Belt
Guide. NEVER place a vehicle belt over
the tab on the Belt Guide, even in a
vehicle with longer buckle stalks.
tt
rr
To Next Page
Loading...
Need help?
General
