51
10. Check that the Recline
Angle remained in the
appropriate range for the
child's weight. If not, remove
Base, adjust recline angle and reinstall.
Make sure that vehicle belt buckle and
hardware do not interfere with correct
installation of the Base or with the
connection of the Infant Carrier to the
Base.
11. If the Infant Carrier is next to a vehicle
door or panel, extend the adjacent L.S.P.
device (pg. 31).
Installing and Removing the Infant Carrier
Installing with Base Using Lap Belt Only
9 - 15.8 kg
(20 - 35 lbs)
1.8 - 9 kg
(4 - 20 lbs)
Recline Indicator
CY_171_8559_A0821
To Next Page
Loading...
Need help?
General
