EasyManuals Logo
Home>CYBEX gold>Car Seat>CLOUD G

CYBEX gold CLOUD G User Manual

CYBEX gold CLOUD G
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
65
Adjust the seat angle until the BLUE LEVEL LINE
on the Infant Carrier is level with the ground.
If you are having trouble achieving the proper
recline angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle under
the Infant Carrier, near the vehicle seat back, as
indicated by the green circle.
It is very important for your child's safety that this child restraint be installed at the
correct angle. Failure to properly recline the child restraint on the vehicle seat increases
the risk of DEATH OR SERIOUS INJURY.
DO NOT use this or any other child restraint with a premature, low birth weight, or
medically fragile infant, until after you have consulted with your doctor. Some infants
may have difculty breathing or have other medical
problems when placed in a seated position.
If the child restraint is TOO UPRIGHT, the child's
head may fall forward and cause breathing
problems. If the child restraint is TOO RECLINED
crash protection will be reduced.
!
WARNING! DEATH or SERIOUS INJURY can occur.
Front of Vehicle
Line must be level with ground when
installed without Base.
Using the Infant Carrier
Adjusting the Recline Angle for an Infant Carrier with No Base

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX gold CLOUD G and is the answer not in the manual?

CYBEX gold CLOUD G Specifications

General IconGeneral
BrandCYBEX gold
ModelCLOUD G
CategoryCar Seat
LanguageEnglish

Related product manuals