72
Securing the Child
9. Position the center of the Chest Clip even
with the child's armpits. Make sure the
Shoulder Pads do not interfere with the
placement of the Chest Clip.
NOTE: If the Shoulder Pads don't allow a
proper t,they can be removed to provide
more space for the Chest Clip. Unsnap to
remove.
10. To test for a properly tightened Harness,
pinch the shoulder strap. A snug Harness
should not allow you to pinch any slack
when pinched between your thumb and
forenger. If needed, pull adjuster strap
further for a tight and proper t.
11. Verify that the seat recline angle is correct.
• If installed with the base, check
that the Recline Angle remains in the
appropriate range for the child's weight.
• If installed without the base, ensure
that the BLUE LEVEL LINE on the
shell is level with the ground.
aa
oo
To Next Page
Loading...
Need help?
General
