CYBEX gold SIRONA S User Manual

86
INSTALLING CHILD RESTRAINT
WITH LAP BELT
NOTE: Before moving the Restraint to the
FORWARD-FACING position, you must first
remove the Tether from the Tether Storage
Compartment on the back of the Restraint.
a. Rotate the Restraint to the FORWARD-
FACING position.
b. Locate the vehicle Tether Anchor and attach
the Tether Hook to the Tether Anchor.
c. Pull the Tether Adjuster Strap to tighten.
ALWAYS USE A TETHER FORWARD-FACING
if a Tether Anchor is available. A Tether
reduces movement of a FORWARD-FACING
child restraint in a crash and helps to achieve
a tight installation. Tether Anchor locations
vary from vehicle to vehicle. Refer to your
vehicle owner’s manual for exact locations,
anchor identification, and requirements. Refer
to page 51 for some common locations.
12. Extend Load Leg (page 44).
1
2
3
4
5
6
7
8
12
CLICK!

CYBEX gold SIRONA S Specifications

General

Category	Convertible Car Seat
Height Limit	Up to 49 inches
Rotation	360-degree rotation
Harness Type	5-point harness
Child Height	Up to 49 inches
Direction	Rear-facing and Forward-facing
Installation	LATCH system
Safety Features	Energy-absorbing shell
Fabric	Machine washable cover
Standard	FMVSS 213
Headrest	Adjustable headrest
Child Age	Birth to 4 years approximately
Additional Features	Magnetic belt holders, Load leg base