31
English
WARNING! DEATH or SERIOUS INJURY can occur
!
Lap/Shoulder Belt with Locking Latch Plate
Lap/Shoulder Belt with Sliding Latch Plate with Locking Retractor
• The latch plate slides freely along the lap/shoulder belt.
Vehicle belts with sliding latch plates are typically locked at
the shoulder belt retractor by buckling the belt and pulling
all of the webbing out slowly to switch the retractor.
• Check vehicle owner’s manual for specific instructions. The
vehicle belt is tightened after switching the retractor by
pulling up on shoulder belt and feeding the webbing into
the retractor.
• The lap portion of this belt does not loosen once the belt is
buckled.
• The vehicle belt is tightened by pulling up hard on shoulder
belt and feeding the extra webbing into the retractor.
SEAT BELT WARNINGS
To Next Page
Loading...
