EasyManuals Logo

CYBEX gold SIRONA S User Manual

CYBEX gold SIRONA S
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
115
English
a
USING SENSORSAFE
®
Receiver Plug:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm (7.87 in) between the radiator & your body.
1. INSTALL THE SENSORSAFE RECEIVER.
Locate the 16PIN OBDII port
a
in your vehicle. Refer to your
vehicle Owner’s Manual for location. Plug in the SensorSafe
Receiver. If unable to locate your vehicle manual, the
SensorSafe Application may contain information regarding the
location of the 16PIN OBDII port for your vehicle.
Your SensorSafe Receiver will sound when it first communicates
with the vehicle network. In some vehicles this occurs
immediately after installing the SensorSafe Receiver. In other
vehicles the tone will not be heard until the vehicle has been
started.
This initialization signal only occurs one time after installation.
2. POWER UP THE VEHICLE.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX gold SIRONA S and is the answer not in the manual?

CYBEX gold SIRONA S Specifications

General IconGeneral
CategoryConvertible Car Seat
Height LimitUp to 49 inches
Rotation360-degree rotation
Harness Type5-point harness
Child HeightUp to 49 inches
DirectionRear-facing and Forward-facing
InstallationLATCH system
Safety FeaturesEnergy-absorbing shell
FabricMachine washable cover
StandardFMVSS 213
HeadrestAdjustable headrest
Child AgeBirth to 4 years approximately
Additional FeaturesMagnetic belt holders, Load leg base

Related product manuals