20
Lap/Shoulder Belt with Sliding Latch
Plate with Locking Retractor
• The latch plate slides
freely along the
Lap/Shoulder Belt.
Vehicle belts with
sliding latch plates
are typically locked at the Shoulder
Belt retractor by buckling the belt and
pulling all of the webbing out slowly
to switch the retractor.
• After locking/switching the retractor,
the vehicle belt is tightened by pulling
up on Shoulder Belt and feeding the
webbing into the retractor. Check
vehicle Owner's Manual for specic
instructions.
!
WARNING! DEATH or SERIOUS INJURY can occur.
Lap Belt with Automatic Locking
Retractor (ALR)
The automatic
locking retractor
does not allow the
Lap Belt to get
longer once it is buckled. The vehicle
belt is tightened by feeding seat belt
webbing into retractor.
To Next Page
Loading...
