38
Product Features and Descriptions
Rigid LATCH is a LATCH system that
connects directly from the Infant Car Seat
Base to the vehicle lower anchors with no
LATCH straps.
NOTE: Rigid LATCH ships already locked in
the Recline Foot position.
• To Remove Rigid LATCH from storage,
rotate 180° A, then lock into Base
Recline Foot B.
• To Return Rigid LATCH to storage, ip
the Base over, pull the lever located on
the underside of the Base C, and rotate
180° back into storage D.
• To Extend or Retract Rigid LATCH,
press button on side of Rigid LATCH E
and extend or retract LATCH Connector
as needed. Repeat for other side.
Rigid LATCH is equipped with red/green
indicators that turn GREEN when the
LATCH Connectors are attached to the
vehicle anchors.
Rigid LATCH
A
B
CLICK!
D
C
E
To Next Page
Loading...
