Cybex 750T Treadmill Total Access (TA) Addendum
Assembly
and Setup
Page 5-2
Units (UNITS):
Choices are “ENGLISH (LB/MPH)” or “METRIC (KG/KPH)” measurements. English is the default.
Frequency (FREQUENCY):
This is the frequency of the power line that supplies power to your treadmill. The default setting is 60 Hz.
NOTE: If you have an English console and a 50 Hz power line frequency, then you must change the default
setting from 60 Hz to 50 Hz for the proper elevation frequency.
Clock Style (HH:MM / MM:DD:YY or DD:MM:YY):
The 750T features a clock and calendar. The clock can be displayed in a 12 or 24 hour format. The
calendar date fomat can be displayed as Month-Day–Year (US) or Day–Month–Year (EU).
“12HR US DATE”
“24HR EURO DATE”
“12HR EURO DATE”
“24HR US DATE”
Current Time (HH:MM):
The 750T features a clock that displays the current time. Examples for 2:57 PM on May 10, 2007.
12HR US DATE “02:57P 5/10/2007”
24HR EURO DATE “14:57 10-05-2007”
12HR EURO DATE “02:57P 10-05-2007”
24HR US DATE “14:57 5/10/2007”
Default Time (DEFAULT TIME):
This is the default time for time based programs if a user does not re-set Time. For example, if you press
Time you can decrease or increase the set workout time up to the amount that the Max time is set.
Choices are 10, 20, 30, 60 and 90 minutes. Default is 30 minutes.
Review Time (REVIEW TIME):
This is the Review Time for which the user’s workout results are displayed at the end of a workout.
Choices are 0:10, 0:20, 0:30, 1:00 and 5:00 minutes. Default is 20 seconds.
Max Time/Time Zones (MAX TIME = MINUTES, ZONED OR OFF):
This is the maximum amount of time the treadmill can run per user workout session. You can limit the
users time or choose ‘OFF’ to disable the Max Time. Valid choices for Max Time are OFF, 20, 30, 40, 50,
60, 90 and 120 minutes or ZONED. For ZONED, you can defi ne a user maximum session time based on
four time zones. This allows limiting use only during busy times of the day.
This is how ZONED is confi gured from the factory:
ZONE1 5:01A 60
ZONE2 9:01A OFF
ZONE3 4:01P 60
ZONE4 9:00P OFF
The maximum session time is limited to 60 minutes from 5AM - 9AM and from 4PM to 9PM in this
example, with all other times unlimited. The zone start/stop time and the time limit in each zone can be
modifi ed to suit your needs.
Max Speed (MAX SPEED):
This is the maximum speed the treadmill will run. Choices are between .5 and 15.6 MPH (0.8 to
25.1 kph). Default MAX SPEED is set at 12.4 MPH (20.0 KPH).
To Next Page
Loading...
Need help?
General
