Cybex 750T Treadmill Total Access (TA) Addendum
Assembly
and Setup
Page 5-3
Max Incline (MAX INCLINE):
This is the maximum elevation the treadmill will incline. Choices are between 0 and 15 percent grade.
NOTE: Setting both the Min and Max incline to 0 percent will disable the elevation.
Min Speed (MIN SPEED):
This is the minimum speed the treadmill will run. Choices are between .5 and 1.0 MPH (0.8 to 1.6 KPH).
Min Incline (MIN INCLINE):
This is the minimum elevation the treadmill will decline. Choices are between -3 and 0 percent grade.
NOTE: Setting both the Min and Max incline to 0 percent will disable the elevation.
Sound (TONE - ON/OFF):
This option will enable or disable the beeper by toggling it on/off. Default is On.
Dormant Display Option (DORMANT STYLE):
This defi nes what is displayed in Dormant mode. Valid Choices for Dormant Display are:
0 – DEFAULT -
1 – TEXT MSG - Dormant Mode Text (see below).
2 – OUT OF ORDER - Out of Order message.
3 – CLOCK - Time clock.
4 – PROFILES - Displays program profi les.
Dormant Text (DORMANT TEXT)
This feature is only available when Dormant Display Option 1 – TEXT is selected. Display the text
message on the Text Area as DORMANT MSG 1 – (message). Once completed, scroll DORMANT MSG
2 – (message), etc. Choices are 1, 2 or BOTH. This is a display-only feature as text can only be entered
using a CSAFE communications link.
Active Mode Text (WORKOUT MSG - ON/OFF):
Active Mode Text, if enabled and a message is stored, will scroll the stored message every fi ve minutes
during a user’s workout. This is a display-only feature as text can only be entered using a CSAFE
communications link.
Remember: You must press Enter after changing a value for that value to be stored.
3. To exit Set Up Mode press the Stop key once.
Your treadmill is now ready for use. Follow the instructions in the Operation chapter to learn how to operate
the treadmill. You should begin with walking speeds first, to be sure everything is functioning properly.
To Next Page
Loading...
Need help?
General
