Cybex Arc Trainer 630A Owner’s Manual
Preventive
Maintenance
Page 4-6
Service Schedule
NOTE: This is the minimum recommended service.
NOTE:
If using optional AC Power Kit, unplug unit from wall outlet.
Determine mileage.
1. Enter Test Mode by holding
down any key
for three seconds
while pedaling the unit.
2. Then press
First 500 Miles
A Check drive belts for tension
& wear.
Every 5000 Miles
A Check drive belts for tension
& wear.
B Move unit and vacuum
underneath.
C Remove access cover to clean
inside - use dry cloth & vacuum.
Every 20,000 Miles
D Check elevation assembly
& replace worn parts.
E Lubricate elevation bushings.
Service Schedule
dist
Date Mileage Service Initials