CYBEX Aton2 User Manual

21
• Insert the lap belt k into the blue belt guides m on
both sides of the car seat.
• Pull the diagonal belt l in driving direction to tighten
the lap belt k.
• Pull the diagonal belt l behind the top end of the baby
seat.
NOTE! Do not twist the car belt.
• Bring the diagonal belt l into the blue belt slot n on
the back.
• Tighten the diagonal belt l.
WARNING! In some cases the buckle q of the car
safety belt may be too long and reach into the belt
slots of the CYBEX ATON 2, making it difcult to
install the ATON 2 securely. If this is the case please
choose another position in the car.
m
k
l
q
n

CYBEX Aton2 Specifications

General

Category	Infant Car Seat
Height Capacity	Up to 32 inches
Installation Type	LATCH or Vehicle Seat Belt
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Infant Insert	Yes
Safety Standards	FMVSS 213
Stroller Compatibility	Yes, with CYBEX strollers
Additional Features	Linear Side-impact Protection
Weight Capacity	4-35 lbs