CYBEX Aton2 User Manual

29
OPENING THE CANOPY
1. Pull the canopy panel away from the seat and turn the
canopy up.
2. To fold away the canopy turn it back to its basic
position.
CYBEX TRAVEL-SYSTEM
Please follow the instruction manual supplied with your
push chair.
In order to attach the CYBEX ATON 2 please place it
against driving direction on the adapters of the CYBEX
buggy. You will hear an audible CLICK when the baby
seat is locked into the adapters.
Always double check if the baby seat is securly fastened
to the buggy.
DEMOUNTING
To unlock the baby seat keep the release buttons r
pressed and then lift the shell up.

CYBEX Aton2 Specifications

General

Category	Infant Car Seat
Height Capacity	Up to 32 inches
Installation Type	LATCH or Vehicle Seat Belt
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Infant Insert	Yes
Safety Standards	FMVSS 213
Stroller Compatibility	Yes, with CYBEX strollers
Additional Features	Linear Side-impact Protection
Weight Capacity	4-35 lbs