CYBEX Aton2 User Manual

37
DURABILITY OF PRODUCT
Since plastic materials wear out over time, e.g. from
exposure to direct sunlight, the product characteristics
may vary slightly.
As the car seat may be exposed to high temperature
differences as well as other unforseeable forces please
follow the instructions below.
• If the car is exposed to direct sunlight for a longer
period of time, the child seat must be taken out of the
car or covered with a cloth.
• Examine all plastic parts of the seat for any damages
or changes to their form or color on a yearly basis.
• If you should notice any changes, you must dispose
of the seat. Changes to the fabric - in particular the
fading of color - are normal and do not constitute a
damage.

CYBEX Aton2 Specifications

General

Category	Infant Car Seat
Height Capacity	Up to 32 inches
Installation Type	LATCH or Vehicle Seat Belt
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Infant Insert	Yes
Safety Standards	FMVSS 213
Stroller Compatibility	Yes, with CYBEX strollers
Additional Features	Linear Side-impact Protection
Weight Capacity	4-35 lbs