Cybex 445T Treadmill Owner’s Manual
Assembly
and Setup
Page 2-14
ELV — This is the maximum elevation the treadmill will incline. Choices are between 0 and 15
percent grade.
Safety Sentry (SAFE) — This is how long the running belt will keep moving if the user steps off the
treadmill. Choices are between 0 seconds (none) and 60 second. Default is 20 seconds. Choosing
“none” will disable this feature. NOTE: See Safety Sentry in Chapter 3 for further detail.
Remember: You must press Enter after changing a value for that value to be stored.
3. To exit Test Mode press the Pause/Stop key once.
Your treadmill is now ready for use. Follow the instructions in the Operation chapter to learn how to operate
the treadmill. You should begin with walking speeds first, to be sure everything is functioning properly.
To Next Page
Loading...
