EasyManuals Logo

CYBEX CX-445T User Manual

CYBEX CX-445T
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Cybex 445T Treadmill Owners Manual
Safety
Page 1-1
1 - Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your area
match the voltage of the treadmill that you have received. The power requirements for the Cybex 445T
treadmill include a grounded, dedicated circuit, rated for one of the following: 115 VAC ±5%, 60 Hz and
20 amps; 220 VAC, 60 Hz and 12 amps or 230 VAC ±5%, 50 Hz and 12 amps. See the serial number
decal for the exact voltage requirements of your treadmill.
WARNING: Do not attempt to use this unit with a voltage adapter. Do not attempt to use this unit
with an extension cord.
WARNING: Do not plug more than one unit into a single circuit.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This product is equipped with a
cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER: Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a quali ed electrician or service provider if you are in doubt
as to whether the treadmill is properly grounded. Seek a quali ed electrician to perform
any modi cations to the cord or plug. Cybex is not responsible for injuries or damages
as a result of cord or plug modi cation.
This treadmill is for use on a nominal 115 VAC
±5%, 60 Hz and 20 amps, 220 VAC; 60 Hz, 12
amps or 230 VAC ±5%, 50 Hz and 12 amps and
a grounded, dedicated circuit. Make sure that
the treadmill is connected to an outlet having the
same con guration as the plug. Do not use a
ground plug adapter to adapt the power cord to a
non-grounded outlet.
115 VAC Euro Plug 220 VAC UK
NEMA 5-20 CEE 7/7 NEMA 6-15 230 VAC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX CX-445T and is the answer not in the manual?

CYBEX CX-445T Specifications

General IconGeneral
BrandCYBEX
ModelCX-445T
CategoryTreadmill
LanguageEnglish

Related product manuals