EasyManuals Logo

CYBEX CX-445T User Manual

CYBEX CX-445T
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background image
Cybex 445T Treadmill Owners Manual
Operation
Page 3-5
12. If the e-stop key is removed during a workout, the drive motor power shuts off immediately, causing
the belt to stop. The right window changes to “OFF” and the left window shows a flashing pattern of
o
” and “
o
”. Replacement of the e-stop key causes Workout Review to begin. Pressing Quick Start
will resume your workout.
13. When you complete a program the treadmill begins a countdown, “3...2...1,” and sounds a tone for
each count. The belt slows to a stop and Workout Review displays in the center window for the
preset time or until you press the Pause/Stop key.
14. The treadmill returns to Dormant Mode.
Stopping the Treadmill
Press Pause/Stop once to pause your workout for up to 20 seconds (or time set for idle) and to enter
the Workout Review. The belt will stop and workout data will remain in memory for the duration of pause.
Press the Quick Start key within 20 seconds to continue your workout and add to the time you already
accumulated. If the Quick Start key has not been pressed during the duration of pause, workout data will
be cleared and the display will change to Dormant Mode.
Press Pause/Stop a second time to interrupt workout data from cycling and to change the display to
Dormant Mode.
The function of the immobilization method: The purpose
of immobilizing the treadmill is to prevent unauthorized use.
This can be accomplished by removing the e-stop key from
the console, unclipping it from the cord and putting it in a non-
accessible place. See Figure 2.
The emergency dismount: Follow the steps listed below if you
experience pain, feel faint or need to stop your treadmill in an
emergency situation:
1. Grip handrails for support.
2. Step onto the top steps.
3. Pull the e-stop key off the console.
The function of the emergency stop: The e-stop key
functions as the emergency stop. In an emergency
situation, remove the e-stop key from the console and the
treadmill will come to a stop. See Figure 3.
Figure 3
Figure 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX CX-445T and is the answer not in the manual?

CYBEX CX-445T Specifications

General IconGeneral
BrandCYBEX
ModelCX-445T
CategoryTreadmill
LanguageEnglish

Related product manuals