CycleOps PowerTap SLC+ User Manual

POWER FUNCTION
The top level of the main display shows current, max,
and average power readings.
1) Press [MODE] to scroll the cursor to the top line
of the main display
2) Press [SELECT] to toggle through the
power function options.
For accurate power readings it is important to frequently
zero the torque, see
ZERO TORQUE.
Current Power
Power is displayed in watts from 0-1999 in 1 watt increments. Current power
readings are displayed only when the word “WATTS” appears below the top line
(FIGURE 9). NOTE: If “WATTS” does not
appear under the top line the computer is
in the Cycle Computer Function. To return to power readings see CYCLE
COMPUTER MODE.
Maximum Power
Both “WATTS” and “MX” displayed simultaneously indicate the highest recorded
power output since the last time the data was cleared in trip mode or the selected
interval in interval mode. (FIGURE 10)
Average Power
Both “WATTS” and “AVG” displayed simultaneously indicate the average power
output since the last time the data wa
s cleared in trip mode or the selected
interval in interval mode. (FIGURE 11)
14
365
25
58.I0
WATTS
3
D
849
25
58.I0
MX WATTS
3
D
I95
25
58.I0
3
D
AV WATTS
FIGURE 9
FIGURE 10
FIGURE 11
Computer Navigation
Press [MODE] to scroll through the various functions of the dis-
play. Press [SELECT] to toggle through the various options
within that funciton. Note: Peak power and Time in Zones infor-
mation is only available on the SLC+, SL+, Pro+ and 2.4+
models.
MODE
button
Power
Speed
Multi Function
Peak Power
Time in Zones
SELECT
button
MX, AV, WATTS
MX, AV
D, T, C, E, O, HR
:30, 1:00, 5:00, 20:00
1,2,3

CycleOps PowerTap SLC+ Specifications

General

Brand	CycleOps
Model	PowerTap SLC+
Category	Measuring Instruments
Language	English