CycleOps PowerTap SLC+ User Manual

COMPUTER SETUP 3
This setup menu includes: zero readings for power, speed, and cadence. NOTE: You are unable to
move back to a previously viewed setting. You must restart setup 3 to make corrections. NOTE:
These settings are useful for determining you average power reading when pedaling only and do
not
effect the data that is stored for download.
1) From the computer setup main menu press [SELECT] and scroll until the
number three (3) is flashing and press [MODE] to enter setup mode.
2) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of watts. Press [MODE] to save.
3) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of speed. Press [MODE] to save.
4) Press [SELECT] to toggle between yes and no for zero
s included in aver-
age of cadence. Press [MODE] to save.
5) Press [SELECT] to toggle between yes and no for auto-zero function.
Normally
leave at yes. NOTE: Auto-zero ‘NO’ is used for track bike use where
large negative torque may be present. Hub modification to fixed gear is
necessary.
28
PRO
3
0’
s
YES
AV WATTS
PRO
0’
s
AV MI
YES
PRO
3
c av
0’
s
YES
PRO
3
t
YES
Set
E
1 2 345
t
d

CycleOps PowerTap SLC+ Specifications

General

Brand	CycleOps
Model	PowerTap SLC+
Category	Measuring Instruments
Language	English