COMPUTER SETUP 4
This setup menu includes: sleep time, locations of display, cadence source, cycle computer mode,
heart rate monitor, and auto start/stop. From this menu you are unable to move back to previ-
ously viewed settings. You must restart setup 4 to make corrections.
1) From the computer setup main menu press [SELECT] and scroll until the
n
umber four (4) is flashing and press [MODE] to enter setup mode.
2) Press [SELECT] to set how many minutes the computer will stay “awake”
after not receiving a valid speed or heart rate signal. Press [MODE] to save.
NOTE: The shorter the sleep time the longer the battery life.
3) Press [SELECT] to determine what is displayed in the middle line. (mi =
speed, c = cadence, ( ) = heart rate). Press [MODE] to save. The selec ted
metric will flash during the ride. NOTE: If heart rate or cadence is s
elected
speed is not displayed. This is useful for intervals when power, heart rate
and cadence are most important.
4) Press [SELECT] to determine cadence information source.
Default = pedal then hub
Pedal = crank only
Hub = hub only
NOTE: An optional cadence sensor is available (sold separately).
Press [MODE] to save.
29
PRO
4
4
SLEEP
PRO
4
mi
PRO
4
pedal
c
Hu
P
Set
E
1 2 345
t
d
To Next Page
Loading...
Need help?
General
