CycleOps PowerTap SLC+ User Manual

5) Press [SELECT] to toggle through digit values to set minutes in time of
day. Press [MODE] to save.
6) Press [SELECT] to toggle through digit values to set year, month, and
date. Press [MODE] to save.
7) Press [SELECT] to toggle through storage rate values (1, 2 seconds).
Press [MODE] to save. NOTE: Different storage rates yield different amounts
of total storage time. Changes to the storage rate do not
effect display
information. Refer to TABLE 3 for appropriate storage rate.
TABLE 3 - PowerTap Storage Rate
8) Press [SELECT] to toggle through digit values to set the wheel circumfer-
ence. Press [MODE] to save. Refer to TABLE 4 for common tire information.
NOTE: For the most accurate reading perform a roll out measurement
(mm) of the rear wheel.
25
Std
03
01-01
c
Year
Day
Month
Std
rec
1
Std
1
CI
r
2096
Recording Rate (sec) SLC+, SL+, Pro+ and 2.4+ (hrs) Elite + (hrs)
1 sec.
12 6
2 sec.
24 12

CycleOps PowerTap SLC+ Specifications

General

Brand	CycleOps
Model	PowerTap SLC+
Category	Measuring Instruments
Language	English