cycliq Fly12 - Contents; Alert; Idle Mode; Incident Protection

2 of 15
Getting Started 3
Identifying parts 3
Before using your Fly12 3
Default Settings 3
Charging the battery 4
Inserting the MicroSD card 4
Removing the MicroSD card 4
Power on/off 4
Other uses of the power  button 5
WiFi on/off 5
Other uses of the WiFi  button 5
Mounting Fly12 with the supplied universal mount 5
Visual and audible alerts 6
Video modes 7
Light modes 7
Idle mode 7
Incident protection 7
Master reset 8
Adjust settings manually 8
Edit settings on your Fly12 manually
(via cong.txt le) 8
Time and date stamp setting (via cong.txt le) 9
Formatting the MicroSD card (via cong.txt le) 9
Reset the WiFi password (via cong.txt le) 9
Race Mode (via cong.txt le) 10
Idle Mode (via cong.txt le) 10
Alert volume settings (via cong.txt le) 11
Set the recording alert level (via cong.txt le) 11
TroubleShooting 12
Regulatory Information 13
FCC compliance statement 13
IC compliance statement 13
Limited warranty 13
Cycliq customer support 13
Caution 13
Index 14
CONTENTS
JOIN THE CYCLIQ
COMMUNITY
Share your videos with the Cycliq community by uploading
them to www.cycliq.com/videos where approved videos are
automatically entered into regular prize draws.
@Cycliq /Cycliq /Cycliq
Follow us on social media
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
1.15
1.16
1.17
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
3
4
4.1
4.2
4.3
4.4
4.5
5