How to reset cycliq Bicycle Accessories Fly6 PRO?
To reset your Fly6 PRO Bicycle Accessories, carefully use a fine object to press the reset button. After that, turn your Fly6 PRO on to confirm the reset was successful. Important: Do not perform a master reset when the Fly6 PRO is updating its firmware, as this may cause damage.
General| Brand | cycliq |
|---|---|
| Model | FLY6 PRO |
| Category | Bicycle Accessories |
| Language | English |
Important information regarding the safe operation and care of the Fly6 PRO.
Important warnings, cautions, and precautions for using the Fly6 PRO device.
Instructions and benefits of registering your Fly6 PRO with Cycliq.
Steps for turning the device on/off and the default home screen display.
Bluetooth, time, light mode, and battery status on the home screen.
How to configure the OLED screen to stay on or turn off automatically.
Instructions on how to format the microSD card, including potential outcomes.
Procedure for factory reset and viewing device information (firmware, serial).
Explains incident protection, manual capture, and still image capture features.
Displays for charging, mass storage, and SD card errors.
Instructions on how to charge the Fly6 PRO battery using USB.
How to understand the audible and visual battery level indicators.
Guide on how to install and remove the microSD card.
Instructions on how to mount the Fly6 PRO using the seat post mount.
Steps for securely attaching the safety tether to the Fly6 PRO.
How to adjust settings via device buttons and the CycliqPlus app.
Information on video resolutions, HDR, and electronic image stabilization.
How the continuous loop recording feature works and its benefits.
Explains incident protection, manual capture, and still image capture features.
Details on audio, heat management, and the quick release mounting system.
Functionality of Idle Mode for battery management and automatic power-off.
How footage is saved in segments and their impact on file size.
Methods to view and access recorded footage on various devices.
How to edit footage using CycliqPlus, overlay metrics, and share.
Connecting to mobile device, time/date, light modes, audio, and video settings.
EIS, Idle mode, and video logo timestamp display toggling via the app.
How to perform a reset using the reset button and important warnings.
Information on where to find help and contact support for issues.
FCC compliance statement, rules, and radiation exposure information.
IC compliance statement, rules, and radiation exposure information.
Cautions on RF exposure, battery replacement, and general usage recommendations.
Information on limited warranty and customer support contact.
To Next Page