25 of 35Fly6 PRO User Guide |
Audio
The Fly6 PRO records high quality sound using an inbuilt microphone. It also
has a speaker which is used for audible alarms and alerts.
Volume levels
The volume of the speaker can be set to low, medium or high.
Audio alerts
A recording alert noti cation can be set, which provides a con rmation chime
at 3, 5, or 10-minute intervals to notify you that the Fly6 PRO is recording.
This is useful when you can’t easily see the LED or display screen while riding.
The recording alert noti cation and volume of the audio can be customised
via CycliqPlus.
Heat protection
The Fly6 PRO is designed with a heatsink, to allow the Fly6 PRO to be cooled
down by wind as you ride.
With in-built sensors monitoring the temperature of the Fly6 PRO, if it ever
reaches an abnormally hot temperature, the main LED will dim to cool the
Fly6 PRO and ensure normal operation.
Features
Cycliq Quick Release System
The Fly6 PRO is mounted and removed from the seat post mount using a
1/8th turn.
To nd compatible Cycliq mounting systems, visit Cycliq accessories.
Idle mode
Idle Mode is intended to assist with battery management. If Idle Mode is
active, the Fly6 PRO turns off automatically after sensing no movement for
15 minutes. You can turn the Fly6 PRO back on as you normally would when
you return to using it.
Idle mode can be toggled on/off via CycliqPlus.
Note
Cycliq recommend familiarising yourself with this function before using it, as this mode can
prevent your ride from being recorded. Idle mode should only be used with audible alerts on,
so you are aware if the Fly6 PRO is turned on.
To Next Page
Loading...
