8 of 35Fly6 PRO User Guide |
Before your first ride
Please follow these steps before your rst ride with your Fly6 PRO.
1. Fully charge your Fly6 PRO - see page 16
2. Ensure the Fly6 PRO port door is securely closed
3. Ensure the safety tether is correctly attached - see page 19
4. Ensure the rotation of the display screen is correct - see page 11
5. Ensure the date and time stamps are correct- see page 28
Turning on your Fly6 PRO
Press and hold the power button (for approximately 2 seconds) until the
power on chime is heard - then release.
Power level ‘beeps’ will sound, indicating the battery status - see section on
battery level indicators on page 16.
Turning off your Fly6 PRO
Press and hold the power button (for approximately 2 seconds) until the
power off chime is heard then release.
Your Fly6 PRO
Light modes
You can cycle through the available light modes using the power button.
• Camera Only (Main LED off)
• Solid High (Main LED solid with high intensity)
• Solid Low (Main LED solid with low intensity)
• Flash High (Main LED fl ashing with high intensity)
• Flash Low (Main LED fl ashing with low intensity)
• Pulse High (Main LED pulsing with high intensity)
• Pulse Low (Main LED pulsing with low intensity)
• Organic (Random generation of high and low intensity)
All light modes are available by default on the Fly6 PRO. You can
customise the available light modes via CycliqPlus, so only your preferred
light modes are available.
Note
To maximise battery life, select a lower intensity light mode and turn off the Fly6 PRO when
not in use. The light mode last used will be remembered when the Fly6 PRO is turned off . The
next time the Fly6 PRO is turned on it will resume with the previously used light mode.
Please consider the bicycle light regulations in your area when setting up
your light modes.
To Next Page
Loading...
