16 of 35Fly6 PRO User Guide |
Charging your Fly6 PRO battery
Your Fly6 PRO comes partially charged. Before using it
for the rst time, please charge fully.
To charge:
• Connect your Fly6 PRO to a USB power adapter (not supplied)
using the supplied USB cable.
• The indicator light will illuminate red showing the Fly6 PRO is charging.
• The indicator light will illuminate green when the Fly6 PRO is fully
charged.
You can charge your Fly6 PRO using the USB cable provided and your
computer however, charging via your computer will signi cantly reduce
the rate of charge. For the quickest charge, use a USB power adapter that
supports USB fast charge (5V @ 2A).
Note
The Fly6 PRO is fast charge compatible and accepts up to 2 amps. Accordingly, the time to
charge from at to fully charged varies from 2.5 to 8 hours depending on the method of
charging, i.e. mains power USB at 2 amps (not supplied) or computer USB (at as little as 0.5A).
Battery life will diminish over time and with charge cycles.
Battery level indicator
When turning on your Fly6 PRO, an audible battery status will sound alerting
you to the current battery level. This allows you to determine if you have
enough power to record your planned ride.
Additionally, you can view the current battery level of your Fly12 on the rear
display screen - see page 10.
See below for audible and visual noti cation guide:
4 rapid high pitched beeps = 75% to 100% charged
3 rapid high pitched beeps = 50% to <75% charged
2 rapid high pitched beeps = 25% to <50% charged
1 rapid high pitched beep = 1% to <25% charged
Setting up your Fly6 PRO
To Next Page
Loading...