18 of 35Fly6 PRO User Guide |
Mounting your Fly6 PRO
Your Fly6 PRO comes with a seat post mount that features the Cycliq 1/8 Turn Quick Release System. There are 2
Velcro strap lengths included to allow for mounting to traditional (narrow) and aero (wide) seat post styles.
To mount:
1. Insert either the standard or aero length seat post strap and pull all the way through until the clasp meets the
seat post mount, ensuring the silicon- coated surface grips your seat post.
2. Select the appropriate spacer or adapter for your bike. Place the spacer or adapter between the Fly6 PRO seat
post mount and the seat post.
3. While holding the mount against your seat post, wrap the Velcro strap around and feed it through the
rectangular hoop at the other end of the strap. Wrap the Velcro back on itself to secure your mount.
4. To mount your Fly6 PRO align the tabs on the Fly6 with the slots in the seat post mount. Turn Fly6 PRO
clockwise a 1/8th turn until you hear a click and then the Fly6 PRO will be locked into the seat post mount.
5. You can easily remove your Fly6 PRO from the bike by removing it from the seat post mount with a 1/8th turn
anticlockwise. You can leave the mount on your bike for next use.
Note
If installing your Fly6 PRO using the universal adapter and a nned style mounting sytem, the process of operating the 1/8th turn is the same
as above.
Setting up your Fly6 PRO
To Next Page
Loading...
