cycliq FLY6 PRO - Visual and audio alerts

21 of 35Fly6 PRO User Guide |
Visual and audio alerts
Mode Visual Alert Audible Alert
Recording (75% to 100% charged)
Display: battery level shown on display screen
LED: flashing red
Power On/Off 4 beeps
Recording (50% to <75% charged)
Display: battery level shown on display screen
LED: flashing red
Power On/Off 3 beeps
Recording (25% to <50% charged)
Display: battery level shown on display screen
LED: flashing red
Power On/Off 2 beeps
Recording (1% to <25% charged)
Display: battery level shown on display screen
LED: flashing red
Power On/Off 1 beep
Power On (with SD card inserted) (refer to above charge level) Power On chime + battery level beep(s)
Power Off (with SD card inserted) (refer to above charge level) Power Off chime
No SD card No SD card error on display screen Error beep will continue every 30 seconds for 2 minutes
Incident Protection mode Display: incident lock icon on display screen 3 rapid beeps when triggered
Manual footage capture Display: manual lock icon on display screen 3 rapid beeps when triggered
USB Plugged in - Charging
Display: battery level shown on display screen
LED: solid red
N/A
USB Plugged in - Fully charged
Display: battery level shown on display screen
LED: solid green
N/A
Optional audible alerts for normal operation (refer to above charge level) Audible sound: 3, 5 or 10 minute beeps
Note
To listen to tones described in the table above visit the Visual and Audio Alerts Guide for Fly6 PRO.